How Do I Connect My SanDisk?

How does a SanDisk work?

Connect Wireless Stick is a USB 2.0 flash drive.

From there, it becomes a wireless external storage device that can stream content to three smartphones and tablets at once.

To access files stored on the stick, you’ll need SanDisk’s free Connect Drive app, available for Android, iOS and Amazon devices..

How do I access my SanDisk wireless flash drive on my PC?

Connecting to a SanDisk Connect Wireless Flash Drive without using an appMake sure your SanDisk Connect Wireless Flash Drive is turned on.Connect to the SanDisk Flashxxxx Wi-Fi network. … Open an Internet browser.Go to www.sandisk.com/wfd/ to connect to the wireless drive.

Why is my SD card not being detected?

Due to an outdated memory or SD card driver, your Android mobile phone or computer may not be able to read or detect the memory/SD card properly. … Right-click on My Computer or This PC and choose “Manage”. In the taskbar on the left, click “device manager” and next to “USB Serial Bus controllers” click “+”.

How do I get my Android to recognize my SD card?

On your Android phone, go to Settings> Storage, find SD card section. If it shows “Mount SD card” or “Unmount SD card” option, perform these operations to fix the problem. This solution has been proved to be able to solve some SD card not recognized problems.

How do I connect my SanDisk to my computer?

1 Use the SanDisk Connect mobile app to access your Wireless Stick. 2 Go to Menu → Settings → Change Drive Name 3 In the text box, name the drive and hit OK. 1 Connect the drive to a PC/Mac computer through the USB connector. 2 Format the drive as a regular USB flash drive.

How do I connect my SanDisk wireless media drive?

Download the FREE Wireless Media Drive app from your mobile device application store. – Turn the Wireless Media Drive ON and wait for the Wi-Fi LED to turn green. – Go to Wi-Fi Settings on your mobile devices to connect to the Drive. (No Internet connection or router is required.)

How do I get my computer to recognize my SD card?

SD Card Can’t Be Read? Here’s How to Fix ItCheck the Card Reader. If the card only fails on one specific device, it could very well be a card reader problem. … Use a Different USB Port. Some computers have more than one USB port. … Restart the Computer. … Update the Drivers. … Check My Computer. … Turn Off Write Protection. … Format for the Right Device.

How do I use a SanDisk Wireless Flash Drive?

Plug the Drive into a computer or USB-AC adaptor. A full charge can take up to 2 hours. Press the Wi-Fi power button until both LEDs flash 3 times. Download the free Wireless Flash Drive app from your mobile device application store.

How do I format my SanDisk wireless stick?

To reset settings to factory default values:Turn the Wireless Stick off.Press and hold the power button down for about 15 seconds.The LED will flash red and green and when the reset is finished the LED will turn white again.

Why is my SD card not showing up?

Possible Reasons for SD Card Not Showing Up on Android Wrong format or SD card reading errors. SD card is not compatible with device. Wrong data transfer mode on Android. Application error on Android.